Table of Contents
Advertisement
8
Rack Mounting
Brackets
9
Lock LEDs
10
LCD On / Off
Button
11
LED Illumination
Light
CL1000N Rear View
1
2
No. Component
1
Power Socket
2
KVM Port
The rack mounting brackets located at each corner of the unit
secure the chassis to a system rack.
The Num Lock, Caps Lock, Scroll Lock LEDs are located
here.
Push this button to turn the LCD monitor on and off. The
button lights when the LCD monitor is off.
Note: The light indicates that only the monitor is off, not the
attached KVM switch.
Press the Exit/Light pushbutton for two seconds to turn the
LED light ON or Off. (Default: On)
This is a standard 3-prong AC power socket. The power cord
from your AC source plugs in here.
The cable that links the CL1000N to the KVM switch plugs in
here.
Note: The shape of this SPHD connector has been
specifically modified so that only KVM cables designed to
work with this switch can plug in (see Cables, page 3, for
details).
Chapter 1. Introduction
Description
7
Advertisement
Table of Contents
