Table of Contents
Advertisement
Chapter 3. Explore your computer
Manage power
Use the information in this section to achieve the best balance between performance and power efficiency.
Check the battery status
The battery status icon
the current power plan, and access battery settings quickly.
Click the battery status icon to display the percentage of battery power remaining and change the power
mode. A warning message is displayed when the battery is low.
Charge the battery
When the remaining battery power is low, charge your battery by connecting your computer to ac power.
The battery is fully charged in about two to four hours. The actual charging time depends on the battery
capacity, the physical environment, and whether you are using the computer.
Battery charging is also affected by its temperature. The recommended temperature range for charging the
battery is between 10°C (50°F) and 35°C (95°F).
Note:
You can check the battery temperature in Lenovo Vantage or Lenovo PC Manager.
To maximize the life of the battery, once the battery is fully charged, it must discharge to 94% or lower
before it will be allowed to recharge again.
Set power button behavior
By default, pressing the power button puts the computer to sleep mode. However, you can change the
power button behavior in Windows Control Panel.
Step 1.
Right-click the battery status icon in the Windows notification area.
Select Power Options ➙ Choose what the power buttons do.
Step 2.
Power input through a USB-C port
The USB-C port on the rear side of your computer supports power input up to 20 V and 5 A. Some external
devices, such as a dock or display, may include a USB-C port that supports power output greater than 20 V
and 2.25 A. If such a device is connected to this rear USB-C port, it is capable of providing power to your
computer.
© Copyright Lenovo 2021
or
is in the Windows notification area. You can check the battery status, view
21
- Quick Links:
- Front
Hide quick links:
Advertisement
Table of Contents
