Ip Address Filtering - TP-Link MR5-WR542G User Manual

Enable Firewall - the general firewall switch is on or off.
Enable IP Address Filtering - set IP Address Filtering is enabled or disabled. There are two default
filtering rules of IP Address Filtering, either Allow or Deny passing through the router.
Enable Domain Filtering - set Domain Filtering is enabled or disabled.
Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select the
default filtering rules of MAC Address Filtering, either Allow or Deny accessing the router.

4.8.2 IP Address Filtering

The IP address Filtering feature allows you to control Internet Access by specific users on your LAN
based on their IP addresses. The IP address filtering is set on this page, Figure 4-35:
MR5-WR542G
Figure 4-34 Firewall Settings
45
54Mbps Wireless Router User Guide