Table of Contents
Advertisement
5.
Reinstall hinge and latch on
opposite sides
Using a T25
screwdriver, reinstall the latch plate and latch
®
backing plate with the 3 screws removed earlier and the hinge
assembly with the 5 screws on the opposite sides from which
they were removed.
6.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
7.
Reinstall door on dryer
Using a T25
dryer. Insert the tabs on the hinge into the mounting slot
and slide down to engage the top tab. Secure in place
with the 4 screws removed earlier.
Bottom
of door
screwdriver, remove the 4 screws on the
®
23
Advertisement
Table of Contents
