Clarion QY-8600 Manual page 27

Touch
1
2 Touch .
The route to your home is automati-
cally calculated and the route guid-
ance is started.
■By Previous Destination
The destinations previously used are
registered in the previous destination
list (up to 100 locations). You can en-
ter a destination by selecting it from
this list. When the previous destina-
tion list exceeds 100 items, the oldest
entries are automatically deleted.
Touch .
1
2 Touch the place you wish to go
from the displayed history list.
3 Touch .
■By Points of Interest (POI)
Select the category of the place, nar-
row down the data by specifying the
area or entering the name, and then
select the place you wish to go to.
By touching , you can also
search a place by simply entering the
name.
26
Touch
. 1
2 Touch your desired category. For
example
category list is displayed, touch a
category again to select one.
3 Set the narrow down conditions
for the places.
● [By Name] key: Input the facility
name to narrow down the target
place.
● [Select a City] key: Input the city
name to narrow down the target
place.
● [Near Current Location] key:
Shows a list of facilities around the
current location.
● [Near Destination] key: When the
destination is set, shows the list of
facilities around the destination.
An example of specifying By Name is
explained below.
.
4 Touch
. When a additional
● [By Distance] key:Sorts the list by
● [New Category] key:Displays the
5 Touch the place you wish to go
6 Confirm the location of the desti-
■By Address Book
Specifies a place registered in the
navigation system as the destination.
Note:
• To use this function, register places
beforehand.
1
. Enter the facility
name, and then touch
nearby order.
Category screen so you select a
new category.
from the displayed place list.
nation, then touch
Touch .
.
.