Table of Contents
Advertisement
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image
is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.
Screen Reset (Reset to original initial values)
Returns Position, Size, and Phase to the default initial settings.
This feature operates only in RGB-PC mode.
1
MENU
Select PICTURE.
2
ENTER
Select Screen (RGB-PC).
3
Select Auto Config. or
ENTER
Reset.
4
ENTER
Select Yes.
5
ENTER
R
W
Phase
Reset
Yes
Phase
Reset
If the position of the image is still not
correct, try Auto adjustment again.
If picture needs to be adjusted again
after Auto adjustment in RGB-PC,
you can adjust the Position, Size or
Phase.
Yes
53
Advertisement
Table of Contents
