Asus RT-N300 B1 User Manual page 26

3. In the Hide SSID field, select Yes to prevent wireless devices
from detecting your SSID. When this function is enabled, you
would need to enter the SSID manually on the wireless device
to access the wireless network.
4. Select any of these wireless mode options to determine the
types of wireless devices that can connect to your wireless
router:
• Auto: Select Auto to allow 802.11n, 802.11g, and 802.11b
devices to connect to the wireless router.
• N only: Select N only to maximize wireless N performance.
This setting prevents 802.11g and 802.11b devices from
connecting to the wireless router.
• Legacy: Select Legacy to allow 802.11b/g/n devices to
connect to the wireless router. Hardware that supports
802.11n natively, however, will only run at a maximum speed
of 54Mbps.
5. Select any of these channel bandwidth to accommodate higher
transmission speeds:
20/40MHz (default): Select this bandwidth to automatically
select the best bandwidth for your wireless environment.
20MHz: Select this bandwidth if you encounter some issues
with your wireless connection.
40MHz: Select this bandwidth to maximize the wireless
throughput.
6. Select the operating channel for your wireless router. Select
Auto to allow the wireless router to automatically select the
channel that has the least amount of interference.
7. If 20/40MHz, 20MHz or 40MHz is selected, you can define an
upper or lower adjacent channel in the Extension Channel field
to be accommodated.
8. Select any of these authentication methods:
• Open System: This option provides no security.
26