Changing The Display Language - TrekStor SurfBook A13B Operating Instructions Manual

If you do not yet have a Microsoft account or are not signed in with it, you must
perform these steps. Open the Windows Store and select the desired app. Click
the app and then click "Install". An assistant now appears to guide you through
the process of setting up a Microsoft account.
i ADVICE
If you set up a Microsoft account and link it to your Surfbook, the password for
unlocking the Surfbook changes. From now on, you have to enter the password
for your Microsoft account to unlock the Surfbook.

20. Changing the display language

Proceed as follows to change the display language:
a) Make sure that your Surfbook is connected to the Internet (see Section 17).
b) Call up the settings (see Section 16).
c) In Settings, tap "Time & language" and then tap "Region & language" on
the left. You are now in the "Country or region" window.
d) Now tap "Add a language" in the centre of the screen.
e) Scroll to and tap the language you require.
f) Click on "Next".
g) Select the language features, and then click "Install".
ADVICE
i
The Surfbook jumps back to the "Country or Region" window, but now
displays the selected language in the list of languages below "Add a Language".
i ADVICE
The Surfbook now downloads the language pack and installs it. This process can
take a few minutes.
h) Wait until the "Will be display language after next sign-in" message
appears under the selected language in the list.
i) Restart your Surfbook. The selected language now appears in the display.
ADVICE
i
If the language pack is already installed, select the language under "Windows
Display Language". Restart your Surfbook. The selected language will now be
shown in the display.
25