TA2050 UG 2-23-05.qxd
Connecting Your TV
Connecting to an Antenna or Basic Cable Jack
VHF, UHF
or Cable
VHF
UHF
Connecting to the Video or S-Video/Audio Jacks
Video Cable
S-Video Cable
VCR/DVD Player/STB
Connecting to the Component Video Jacks
DTV Receiver/DVD Player/VCR
10
2/23/05
10:05 AM
Page 10
75-ohm coaxial cable
OR
300-ohm twin lead cable
Antenna adapter
(Not supplied)
OR
Audio Cable
OR
Component
Cable
Audio Cable
U/V mixer
(Not supplied)
Connection Procedures
Œ Connect your antenna/cable to the ANTENNA IN jack
on the back of your VCR.
´ Connect the VIDEO/AUDIO OUTPUT jacks on your
VCR to the VIDEO/AUDIO INPUT jacks on the TV
using video/audio cables. Be sure to match each
cable to the jack of the same color.
- For better video quality, use an S-Video cable to
connect your VCR or DVD player.
- If your VCR does not support stereo sound,
connect the MONO AUDIO OUTPUT jack to the
AUDIO INPUT (left) jack.
Procedures for Watching
Turn on the TV, and select VIDEO using the LINE button.
- If you have connected an S-Video cable, select
S-VIDEO.
Connection Procedures
Connect the COMPONENT VIDEO/AUDIO INPUT jacks on
the TV to the COMPONENT VIDEO/AUDIO OUTPUT jacks
on your DVD Player/DTV receiver using component
video/audio cables. Be sure to match each cable to the
jack of the same color.
Procedures for Watching
Turn on the TV, and select COMPONENT using the
COMPONENT button.