Important Safety Instructions; For Best Performance - Panasonic KX-HNS103 Installation Manual

Home network system water leak sensor
Hide thumbs Also See for KX-HNS103:
Table of Contents

Advertisement

thoroughly with water, and then
consult a doctor.
CAUTION
Installation and location
R Although this unit conforms to the
IPX4
intentionally expose it to water.
*1
CR Lithium battery
R Use only the battery noted on
page 3.
R Insert the battery correctly.
R Do not leave the battery in an
automobile exposed to direct
sunlight for a long period of time with
the doors and windows closed.
R Remove the battery if you do not
use the product for a long period of
time. Keep it in a cool, dark area.
R Do not replace a battery with wet
hands.
R Keep out of the reach of small
children. There is a risk of
swallowing. If the battery is
swallowed, seek medical attention
immediately.
R Remove the battery if it becomes
unusable. There is a risk of leakage,
overheating, and rupture. Do not
attempt to use a battery if it is
leaking.
R Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets, or
keys to touch the batteries,
otherwise a short circuit may cause
the batteries and/or the conductive
material to overheat and cause
burns.
For assistance, please visit www.panasonic.com/support
HNS103_(en_en)_1120_ver.010.pdf
*1
specification, do not
IPX4 indicates that the unit is
not harmfully affected by water
sprayed on it from any direction.
5
Important Information
Important safety
instructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
1. Use only the batteries indicated in
this document. Do not dispose of
batteries in a fire. They may
explode. Check with local codes for
possible special disposal
instructions.
SAVE THESE INSTRUCTIONS

For best performance

Hub location/avoiding noise
The hub and other compatible
Panasonic devices use radio waves to
communicate with each other.
R For maximum coverage and
noise-free communications, place
your hub:
– at a convenient, high, and central
location with no obstructions
between the product and hub in
an indoor environment.
– away from electronic appliances
such as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio frequency
transmitters, such as external
antennas of mobile phone cell
stations. (Avoid putting the hub
on a bay window or near a
window.)
5
2014/11/19
19:26:58

Advertisement

Table of Contents
loading

Table of Contents