Table of Contents
Advertisement
r After making the individual DSC call, the transponder will
display "DSC Transmission COMPLETED."
• Push [CLEAR] to return to the screen displayed before you en-
tered the voice channel selection screen in step w.
• The transceiver stands by on Channel 70 until an acknowledge-
ment is received.
Transponder's display
Step 2: Transceiver's operation
t When the acknowledgement is received, beeps sound.
➥ If the acknowledgement 'Able to comply' is received,
push [ALARM OFF] to stop the beeps, and then select
the intership channel specified in step w.
• A different intership channel will be selected if the station you
called cannot use the channel.
• To reply, push [PTT] and speak at a normal voice level.
• You can check the MMSI code or the name, if programmed,
of the AIS target on the display.
➥ If the acknowledgement 'Unable to comply' is received,
push [ALARM OFF] to stop the beeps, and then return
to the operating channel before you entered the MENU
screen.
Microphone's display
AIS TRANSPONDER
'Able to comply' is received
' Unable to comply' is received
y After the communication is finished, push [EXIT] to return
to the normal operating mode.
TRANSPONDER
3
1
2
3
4
5
6
7
8
9
10
11
12
13
[Y]
14
[Z]
15
[CLEAR]
16
[DSC]
5
Advertisement
Table of Contents
