Table of Contents
Advertisement
When sending images to PC
Preparations:
•
Turn the computer on.
•
Prepare folders for receiving images on the PC before sending a picture to the PC.
•
If the workgroup of the destination PC has been changed from the standard setting, you also need
to change the setting of this unit in [PC Connection].
1
Press [Wi-Fi].
2
Press 3/4/2/1 to select [New Connection], and then
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination
from [History Connection]
3
Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].
4
Press 3/4 to select [PC], and then press [MENU/SET].
5
Press 3/4 to select connection method, and then press [MENU/SET].
[Via Network]
[Direct]
6
Press 3/4 to select the PC you want to connect to, and then press [MENU/SET].
7
Press 3/4 to select the destinations folder of the PC, and then press [MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.].
(P145)
8
Take pictures.
•
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
•
Folders sorted by the sent date are created in the specified folder, and pictures are saved in those
folders.
•
If the screen for a user account and password entry appears, enter the one you set on your PC.
(P135)
or [Favorite Connection] (P136).
When you want to connect to your PC via a wireless access point.
(P138)
When you want to directly connect your PC to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection].
Wi-Fi
(P168)
(P142)
- 146 -
(P147)
(P140)
Advertisement
Table of Contents
