Table of Contents
Advertisement
•
Location information can be written only to images taken on this camera.
•
Location information is not written onto the images that are recorded after [Send location data].
(P134)
•
Location information is not written onto the images recorded when [Rec Format] is set to [AVCHD].
•
When there is insufficient free space on the card, location information might not be able to be written.
•
When the card is locked, location information cannot be written onto the images or received location
information cannot be deleted.
[Title Edit]
You can add text (comments) to pictures. After text has been registered, it can be stamped in
prints using [Text Stamp] (P116).
1
Select [Title Edit] on the [Playback] menu.
2
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
3
Select the picture, and then press
[MENU/SET] to set.
•
['] is displayed for pictures with titles already
registered.
[MULTI] setting
Press [DISP.] to set (repeat), and then
press [MENU/SET] to set.
•
The setting is cancelled when [DISP.] is
pressed again.
4
Enter the text.
•
Exit the menu after it is set.
•
To delete the title, erase all the text in the text input screen.
•
You can print out texts (comments) using the "PHOTOfunSTUDIO" bundled software on the
CD-ROM (supplied).
•
You can set up to 50 pictures at one time in [MULTI].
•
You cannot use [Title Edit] for the following pictures.
–
Motion pictures
–
Pictures taken with [3D Photo Mode] in Scene Mode
–
Pictures recorded with other equipment
Playback/Editing
(P80)
- 115 -
(P44)
[SINGLE]
Press 2/1 to
select the picture.
[MULTI]
1
2
3
4
5
6
Press 3/4/2/1 to
select the pictures.
Advertisement
Table of Contents
