Panasonic Lumix DMC-FS12 Operating Instructions Manual page 28

x [USB MODE]
• When [PC] is selected, the camera is connected via the "USB Mass Storage" communication
system.
• When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
Protocol)" communication system.
¢
| [VIDEO OUT]
• This will work when the AV cable
¢ PAL video out is not available on the version DMC-FS12P sold in the U.S. and the version
DMC-FS12PC sold in Canada.
[TV ASPECT]
• This will work when the AV cable
[VERSION DISP.]
Preparation
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Set to match the color television system in each country.
(Playback mode only)
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
(P123) is connected.
Set to match the type of TV.
(Playback mode only)
[W]: When connecting to a 16:9 screen TV.
[X]: When connecting to a 4:3 screen TV.
(P123) is connected.
It is possible to check which version of
firmware is on the camera.
- 28 -