Inserting The Battery - Panasonic Lumix DMC-FZ2B Operating Instructions Manual

Inserting the Battery

2
Preparation
[Preparation]
• Check that the camera switch is set to [OFF]
and the lens is fully retracted.
3
• Close the flash. (P39)
1
Slide the lever in the direction of the
arrow to open the Memory Card/
battery door.
2
Insert the charged battery all the way
in, until it is locked.
3
Close the Memory Card/battery door.
[Removing the battery]
2
1
Open the Memory Card/battery door.
2
Slide the lock 1 to the direction of the
arrow to remove the battery.
3
Close the Memory Card/battery door.
• If you will not be using the camera for a long
time, remove the battery.
• A fully charged battery needs to be left in
the camera for at least one hour for the
clock settings to be retained for about
24 hours after the battery has been
3
removed. (The time may be shorter if the
battery is not charged sufficiently)
When the clock setting is cancelled, please
set the date/time again. (P30)
• When the card is being read, do not open
the Memory Card/battery door.
• The battery supplied with this camera is
exclusively designed for this camera. Do not
use with any other equipment.
14