Table of Contents
Advertisement
Watching a Blu-ray disc
To watch a Blu-ray Disc
1
Insert a Blu-ray Disc into your player.
2
Press ► (play) on the remote control of the Blu-ray Disc player.
» The Blu-ray Disc might automatically play on the TV.
If the picture does not appear
1
Press SOURCE repeatedly to select the Blu-ray Disc player and
wait a few seconds for the picture to appear.
2
Use the remote control of the Blu-ray Disc player to play the disc.
Switching audio mode
This section describes how to switch audio language in digital mode and
how to switch audio in analog mode.
DTV
1
Press SAP to display the currently selected language and the
number of available languages.
English 1/3
English 1/3
2
Press SAP repeatedly to cycle through the available audio
languages.
Available languages differ depending on the broadcast. [Other]
•
is displayed when the audio language cannot be acquired, or the
acquired languages are other than English, Spanish or French.
Note
•
SAP does not control external audio devices.
•
The information display will automatically disappear in a few seconds.
TV
Press SAP to display the currently selected audio mode. While
receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
SAP
English 1/3
When all audio are available
SAP
/ STEREO
SAP
/ STEREO
SAP /
SAP /
When stereo and monaural audio are available
MONO
MONO
/ STEREO
/ STEREO
When SAP and monaural audio are available
SAP /
MONO
MONO
/ STEREO
When only monaural audio is available
MONO
(Cannot be switched)
STEREO : Outputs stereo-audio
SAP
: Outputs second audio program
MONO : Outputs mono-audio
11.1
11.1
11.1
11
/ STEREO
SAP
/ MONO
SAP
/ MONO
STEREO
STEREO
MONO /
MONO /
STEREO
STEREO
SAP
/ MONO
MONO /
STEREO
14
English
Advertisement
Table of Contents
