TP-Link MR0-WR941N User Manual page 23

Step 2: Choose Press the button of the new device in two minutes and click Connect..
Step 3: For the configuration of the wireless adapter, please choose Push the button on my
access point in the configuration utility of the WPS as below, and click Next.
II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my Router
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-2,
then the following screen will appear.
MR0-WR941N/MR0-WR941ND
Figure 4-3 Add A New Device
The WPS Configuration Screen of Wireless Adapter
- 18 -
Wireless N Router