Table of Contents
Advertisement
Precautions >
Handling "Memory Stick"
Handling "Memory Stick"
❑ Do not touch the "Memory Stick" connector with your finger or metallic objects.
❑ Use only the adhesive label supplied with "Memory Stick" as a label.
❑ Do not bend, drop, or expose "Memory Stick".
❑ Do not disassemble or modify "Memory Stick".
❑ Do not let "Memory Stick" get wet.
❑ Do not use or store "Memory Stick" in a location subject to:
❑ Static electricity
❑ Electrical noise
❑ Extremely high temperatures, such as in a car parked in the sun
❑ Direct sunlight
❑ High humidity
❑ Corrosive substances
❑ Use the storage case supplied with "Memory Stick".
❑ Be sure to make a backup copy of your valuable data.
❑ When using "Memory Stick Duo", do not use a fine-tipped pen to write on the label adhered to "Memory Stick Duo".
Exerting pressure on the media may damage internal components.
Handling the Built-in Storage Device
The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short
time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be
restored. To prevent losing data, you should be careful when handling your computer.
n
97
N
Advertisement
Table of Contents
