Channel; Auto Tuning; Atv Manual Tuning; Programme Edit - Philips 32PFL2507 User Manual

Channel

Auto Tuning

1
Press MENU and use ◄► to select
CHANNEL
Move Menu
2
Use ▲▼ to select Tune Type, then press OK.
• When Air is selected, the TV detects antenna signals. It searches
for NTSC channels available in your area.
• When Cable is selected, the TV detects signals supplied by cable.
It searches for NTSC and Cable channels available in your area.
3
Use ▲▼ to select Auto Tuning, then press OK to start scanning.
• When the scanning and memorizing are completed, the lowest
memorized channel will be displayed.
• If you press MENU during the scanning, this operation will be
stopped and a confirmation display will appear, then you can
cancel scanning.

ATV Manual Tuning

You can search channels manually in your area.
1
Press MENU and use ◄► to select
2
Use ▲▼ to select ATV Manual Tuning, then press OK
3
Use ▲▼ to select Current CH, then use ◄► to select the
channel you want.
4
Use ▲▼ to select Color System, then use ◄► to select the
channel you want.
5
Use ▲▼ to select Sound System, then use ◄► to select the
channel you want.
6
Use ▲▼ to select Fine Tune, then use ◄► to adjust the setting.
7
Use ▲▼ to select AFC, then use ◄► to select On or Off.
• If you set to On, this unit searches a near channel automatically.
8
Use ▲▼ to select Search, then use ◄► to search a current
selected channel.
CHANNEL).
(
Tune Type Air
Auto Tuning
ATV Manual Tuning

Programme Edit

Enter Exit
CHANNEL).
(
.
Programme Edit
You can edit the programme settings.
1
Press MENU and use ◄► to select
2
Use ▲▼ to select Programme Edit, then press OK to enter
Programme Edit list.
Delete : Press RED to delete the current channel.
Rename : Press GREEN and use
channel name.
Move : Press YELLOW and use ▲ / ▼ to move the current channel.
Skip : Press BLUE to skip the current channel.
Fav : Press FAV to register the current channel.

Screen

You can change the screen settings automatically.
1
Press MENU and use ◄► to select
SCREEN
Move Menu
2
Use ▲▼◄► to select the item you want to adjust, then press
OK.
Auto Adjust
to adjust the screen settings automatically
Cursor ◄
H-Offset
move PC screen left
V-Offset
move PC screen down
Clock
decrease setting value
Phase
CHANNEL).
(
▲▼◄►
to change the current
SCREEN).
(
Auto Adjust
H-Offset 30
V-Offset 30
30
Clock
0
Phase
Enter Exit
Cursor ►
move PC screen right
move PC screen up
increase setting value
16
English