Table of Contents
Advertisement
Data Communication
Bluetooth function
You can connect the handset to Bluetooth devices wirelessly.
Wireless communications with all the Bluetooth devices are not
completely guaranteed.
■
Specifications
Supported version
Bluetooth standard Ver.4.2
Output
Bluetooth standard Power Class 1
*2
Supported profiles
(Supported services)
*3
HSP: Headset Profile
HFP: Hands Free Profile
A2DP: Advanced Audio Distribution Profile
AVRCP: Audio/Video Remote Control Profile
HID: Human Interface Device Profile
DUN: Dial-up Networking Profile
OPP: Object Push Profile
*9
SPP: Serial Port Profile
PBAP: Phone Book Access Profile
PAN: Personal Area Networking Profile
HOGP: HID Over GATT Profile
*1 The handset and all Bluetooth function-installed devices have
ensured that they conform to the Bluetooth specification
according to the rules that the Bluetooth SIG defines, and are
all authenticated. However, operating methods might differ or
data might not be exchanged even when a connection is made,
depending on the features or specifications of the connected
device.
*2 Standardizes the communication procedures of Bluetooth
device by feature.
*3 Connect a commercially available Bluetooth compatible
headset to the handset to talk wirelessly.
*4 Connect a commercially available Bluetooth compatible
hands-free device such as a car navigation system to the
handset to talk during hands-free operation using the car
navigation system etc.
*5 Connect a commercially available Bluetooth compatible audio
device to the handset to play music etc. wirelessly. Also,
remote control operation may be available from Bluetooth
devices. However, compatible devices may be limited
depending on the data type.
*6 Connect a commercially available Bluetooth compatible input
device such as a keyboard and mouse to the handset to
operate the handset from the device.
*7 Connect a Bluetooth compatible PC etc. to the handset to use
the handset as a modem and make data communications. Note
that packet communication charges are incurred. You cannot
use mobile networks on the handset during DUN connection.
*8 Connect a Bluetooth device to the handset with the file transfer
service to send and receive data between them.
*9 Set the virtual connection with a serial cable and interconnect
between devices.
*10 Transfer phonebook data on the handset memory to a
Bluetooth device. Data may not be displayed correctly on the
other party's device depending on the contents of the
transferred phonebook data.
*11 Join a PC network etc. and share the Internet connection. Also,
connect a PC etc. to the handset via Bluetooth to use the
Bluetooth tethering.
*12 Connect a Bluetooth Smart device such as a keyboard and
mouse to the handset to operate the handset from the device.
*1
*4
*5
*5
*6
*7
*8
*10
*11
*12
Refer to manuals of Bluetooth devices as well.
The settings of access points for DUN profile can be changed
from a Bluetooth device such as a PC or car navigation system.
If connection to an access point via DUN profile becomes
unavailable, it is recommended to initialize access points
(>P. 24 "Resetting an access point").
Audio may not be output with Bluetooth devices which are not
compatible with SCMS-T depending on the data type.
Precautions about handling Bluetooth devices
Note the followings when using Bluetooth devices.
Note the followings to make good connection.
Keep the distance between the handset and another
Bluetooth device within approximately 10 m with no
obstructions in sight. The distance within which you can
make connection may be shorter when there are
obstructions between them or depending on the conditions
of the surroundings (such as walls or furniture) and the
structure of a building. Especially when there is a wall, floor
or ceiling of reinforced concrete between them, they may be
unable to connect with each other. Note the above
mentioned distance is not guaranteed.
Move the handset and another Bluetooth device as far away
as possible from home electric appliances, AV devices, OA
devices, etc. before connection. Bluetooth devices are liable
to be adversely affected by a microwave oven, so move
them as far away as possible from the microwave oven
while using them. Otherwise, normal connection cannot be
performed when other electric devices are powered on or
Bluetooth devices may cause noises or reception failure on
a TV or radio set.
Move the other party's Bluetooth device to a place where
connection is possible when there is a broadcast station,
radio, etc. near the Bluetooth device and the handset cannot
be connected to the device. Strong radio waves may prevent
connection between Bluetooth devices.
Wireless connection is available with Bluetooth devices put
in a bag or pocket. However, lowering of communication
speed or noise may result when you are in between the
Bluetooth device and the handset.
Electromagnetic signals from Bluetooth devices may affect the
operation of electronic medical equipment etc. As some cases
may result in accident, turn off the handset and other Bluetooth
devices in the following places.
On trains
On airplanes
In hospitals
Near automatic doors or fire alarms
In places such as gas stations where flammable gas is
generated
Radio interference with Wi-Fi compatible devices
The Bluetooth devices use the same frequency band (2.4
GHz) as wireless LANs (IEEE 802.11b/g/n). Therefore, using a
Bluetooth device near a wireless LAN device may cause the
radio interference, lowering of communication speed, noise or
connection failure. In this case, turn off the wireless LAN
device or keep the handset and the other party's Bluetooth
device at least approximately 10 m away from the wireless
LAN.
77
Data Communication
Advertisement
Table of Contents
