Step 2 Setting The Date And Time - Sony DCRPC120 Operating Instructions Manual

Step 2 Setting the date and time

Set the date and time settings when you use your camcorder for the first time. "CLOCK
SET" will be displayed each time that you set the POWER switch to CAMERA or
MEMORY unless you set the date and time settings.
If you do not use your camcorder for about three months, the date and time settings
may be released (bars may appear) because the built-in rechargeable battery installed in
your camcorder will have been discharged (p. xx).
Set the area, the summer time, year, month, day, hour and then the minute, in that
order.
(1) Set the POWER switch to CAMERA or MEMORY, then press MENU to display
(2) Press v/V on the control button to select
(3) Press v/V on the control button to select CLOCK SET, then press zor B.
(4) Press v/V on the control button to adjust the desired area (where you are),
(5) Press v/V on the control button to select whether or not the time is summer
(6) Press v/V on the control button to adjust the desired year, then press z.
(7) Set the month, day and hour by pressing v/V on the control button and
(8) Set the minute by pressing v/V on the control button and pressing z by the
(9) Press MENU to make the menu settings disappear.
16
the menu settings.
then press z.
time, then press z.
Select NO if the time is not summer time. Select YES if it is.
The year changes as follows:
1995 T · · · · t 2001 T · · · · t 2079
pressing z.
time signal. The clock starts to move.
, then press z or B.