Glyph GT050Q1F-1000 Quick Manual page 7

Fixed-mount tabletop hard drive with quad interface: firewire 800, firewire 400, usb 2.0 hi-speed, and esata
Hide thumbs Also See for GT050Q1F-1000:
Table of Contents

Advertisement

GT 050Q
Most 800 ports are Bi-Lingual, which means they speak both
FireWire 400 and FireWire 800.
If you connect a 400 device to an 800 device, you will be running
at 400 speed maximum.
FireWire is forward-compatible and back-compatible, but the bus
always runs at the speed of the slowest link.
Beta cables are used to connect 800 devices to 800 devices.
Bi-Lingual cables are available to connect 400 devices to 800
devices.
Bi-Lingual cables have a 9-pin Bi-Lingual connector at one end and
a 4-pin or 6-pin FireWire 400 connector at the other end
eSATA Facts
eSATA is an external interface technology that grew from the
internal SATA I interface.
The GT 050Q's eSATA port supports speeds up to 1.5 Gb/sec
(150 MB/sec), much faster than FireWire 400 or FireWire 800.
Shielded eSATA cables up to 2 meters in length are available.
eSATA cables are different than SATA I cables, they are shielded
and cannot be used with internal SATA I connectors.
eSATA uses a "point-to-point" connection, therefore each eSATA
drive needs to be connected to its own eSATA port.
Most computers do not have built-in eSATA, so you'll need a PCI
card to connect your drive with eSATA.
PCI cards are available with 2 or more ports to accommodate your
drives.
Quick Guide #610021-1.02
© Glyph Technologies – www.glyphtech.com
About the GT 050Q
5

Advertisement

Table of Contents
loading

Table of Contents