In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according to the destination listed in the table below, and press
the Power button.
Time(s)
1 time
2 times
3 times
4 times
5 times
6 times or
more
Note: After setting the destination, confirm the model name in service test print or EEPROM information print.
[See 3.4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
LED
Orange
Japan: iP4100
Green
Other than Japan, non-support of CD-R printing (A4): iP4000
Orange
Other than Japan, non-support of CD-R printing (LTR): iP4000 (LTR)
Green
Other than Japan, support of CD-R printing (A4): iP4000
Orange
Other than Japan, support of CD-R printing (LTR): iP4000 (LTR)