Table of Contents
Advertisement
Frequently Asked Questions
Problem
The buzzer sounds.
One of the following
fault messages appears
in the display:
Technical fault FXX
Waterproof fault
Technical fault F78
84
Possible cause and solution
Before fixing the fault:
Turn the dishwasher off using the sensor but-
ton.
There may be a technical fault.
After a few seconds:
Turn the dishwasher back on.
Select the desired program.
Press the Start sensor button.
If the error message is displayed again, there is a
technical fault.
Contact Miele Service.
The WaterProof System has reacted.
Turn off the water supply.
Contact Miele Service.
A fault has occurred in the circulation pump.
Turn the dishwasher off for at least 30 seconds
with the sensor button.
Turn the dishwasher back on.
Select the desired program.
Press the Start sensor button.
If the error message is displayed again, there is a
technical fault.
Contact Miele Service.
Advertisement
Table of Contents
