Table of Contents
Advertisement
Settings menu
Volume
A sequence of buzzer tones will sound
at the end of the program or if there is a
fault as long as the buzzer has been ac-
tivated.
Buzzer in the event of a fault
The buzzer in the event of a fault will
sound four times at intervals with a
short pause between each set of tones.
The buzzer which sounds when there
is a fault cannot be deactivated.
Buzzer at the end of a program
The buzzer at the end of a program will
sound four times at intervals with a
short pause between each set of tones.
Buzzer tones
The volume of the tone at the end of the
program can be selected in seven
stages or switched off.
Select the volume you want using the
Quieter
and
Louder
buzzer off.
Confirm with
OK
Night time buzzer tone
You can select a different volume for
the buzzer at night, or turn it off.
Select the volume you want for the
night time buzzer using the
and
Louder
options, or switch the
night-time buzzer off.
Confirm with
OK
74
options, or turn the
.
Quieter
.
Night time
You can select the times for night time
to begin and end.
Select the
Start at
Use
to set the time in hours and
+/-
minutes for the night time to begin
and confirm both with
Select the
Finish at
Use
+/-
to set the time in hours and
minutes for the night time to end and
confirm both with
Keypad tone
An audible tone sounds each time a
sensor button is pressed.
The volume for the keypad tone can be
set in seven stages or switched off.
Select the volume you want using the
and
Quieter
Louder
the keypad tone off.
Confirm with
OK
option.
.
OK
option.
OK
.
options, or switch
.
Advertisement
Table of Contents
