No surround sound output
on HDMI connection.
Play
Disc does not play.
Unable to play DivX movies
A DVDR/ DVDRW
recorded on this DVD
recorder does not play on a
DVD player.
The message 'UNKNOWN
DISC' is displayed.
88
EN
•
It depends on your TV audio capabilities. In this case, connect
COAXIAL DIGITAL OUT of this recorder to your TV or AV
amplifi er receiver. Disable the HDMI audio output.
•
Insert the disc with the label facing up.
•
Wrong region code. The DVD must be coded for ALL regions
or Region 2 for playback on this recorder.
•
There is no recording on the disc or it is a wrong disc type. See
chapter "Play - Play video".
•
Ensure that the disc is not scratched or warped. Clean the disc
or replace a new one.
•
Check if the disc is defective by trying another disc.
•
Check that the DivX fi le is encoded according to the 'Home
Theatre Profi le' mode with DivX encoder.
•
Check that the DivX movie downloaded is a complete fi le.
•
If a recording is too short, it is possible that a DVD player
cannot detect it. Please follow the minimum recording times for
each recording mode : [ HQ ] – 5 mins, [ SP ] – 10 mins, [ SPP ]
– 13 mins, [ LP ] - 15 mins, [ EP ] – 20 mins, [ SLP ] – 30 mins.
•
You have to fi nalise the DVDR. See chapter "Edit Recordings -
Play your recordings on other DVD Players".
•
This message may appear if you insert a disc that may have
encountered one of the following:
•
Error during recording: the title may be missing.
•
Error while changing the title/ index picture: the original
title/ index picture may be visible.
•
Error during the fi nalisation of the disc or the disc has not
been fi nalised.