Manage Easylink Settings - Philips HDR3800/31 User Manual

Restore default settings
This setting resets the recorder to factory
default settings.
Note
•
After the reset, the initial setup is required.
1
Press HOME.
2
Select [ Settings ], then press OK.
3
Select [ System ] > [ Restore default ],
then press OK.
A confi rmation message is displayed.
• To cancel, select [ Cancel ], then press
OK.
4
To proceed, select [ OK ], then press OK.
Once complete, the recorder switches
off, then restarts. (See chapter 'Get
Started - First Time settings').\
78 EN

Manage Easylink settings

Notes
•
Your TV and other connected deivices must be
compliant with HDMI CEC.
•
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
Enable Easylink
Before you start...
You must switch on the HDMI CEC operations
on your TV/devices to enjoy the EasyLink
controls. See your TV/devices manual for
details.
1
Press HOME.
2
Select [ Settings ], then press OK.
3
Select [ Misc ] > [ Easylink ], then press
.
4
Select an option and press OK.
[ On ]
Enable HDMI CEC compliant TV/devices
to control each other with a single remote
control.
[ Off ]
Disable the feature.
5
To exit the setup menu, press the Blue
button [ Exit ].