Table of Contents
Advertisement
Viewfinder status display
In addition to video, the viewfinder displays messages, a center marker, safety zone marker, zebra
patterns, and other information that indicate the camera settings and operation status.
Lamp display
1 Green tally lamp
Lights up in green when green tally signals are received.
2 Red tally/recording lamp
Lights up in red during recording or when red tally signals are received.
This will illuminate in red during recording with an external device when [SDI REC REMOTE] is set to
[ON], or [SDI RAW] is set to anything other than [OFF].
3 Warning lamp
Flashes or lights up when a warning occurs with the camera.
4 Battery lamp
Starts flashing when the remaining battery level is low. Illuminates when it reaches the battery end.
Status display
Adjusting the screen
1
Press the <EVF MENU> button.
Screen adjustment items are displayed on the upper part of the screen.
2
Turn the jog dial button to select the items you want to adjust.
3
Press the jog dial button.
4
Turn the jog dial button to make adjustments.
5
Press the jog dial button.
6
Press the <EVF MENU> button.
The screen adjustment items display disappears.
1
2
3
Viewfinder status display
15
Advertisement
Table of Contents
