Standard Cmos Features - Gigabyte GA-VM900M User Manual

2-1

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
Drive A
Floppy 3 Mode Support
Halt On
Base Memory
Extended Memory
: Move Enter: Select
F5: Previous Values
Date
The date format is <week>, <month>, <day>, <year>.
Week The week, from Sun to Sat, determined by the BIOS and is display-only.
Month The month, Jan. Through Dec.
Day The day, from 1 to 31 (or the maximum allowed in the month)
Year The year, from 2000 through 2099
Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-
time clock. For example, 1 p.m. is 13:0:0.
IDE Channel 0/1 Master/Slave
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Channel 0/1 Master/Slave
IDE devices setup. You can use one of three methods:
• Auto Allows BIOS to automatically detect IDE/SATA devices during POST.
(Default value)
• None Select this if no IDE/SATA devices are used and the system will skip the
automatic detection step and allow for faster system start up.
• Manual User can manually input the correct settings.
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
Capacity Capacity of currectly installed hard drive.
IDE Channel 2/3 Master
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
Extended IDE Drive You can use one of the two methods:
• Auto Allows BIOS to automatically detect IDE/SATA devices during POST(default)
• None Select this if no IDE/SATA devices are used and the system will skip the
automatic detection step and allow for faster system start up.
GA-VM900M Motherboard
Standard CMOS Features
Tue, May 29 2007
14:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[Disabled]
[All, But Keyboard]
640K
447M
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 30 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults