Table of Contents
Advertisement
Self-timer
The camera releases the shutter when the set number of seconds elapses after you
press the shutter-release button. Set Photo VR (A165) to Off in the setup menu
when using a tripod to stabilize the camera during shooting.
1
Press the multi selector
2
Select the number of seconds until
the shutter is released, and press the
k button.
n10s (10 seconds): Use on important
occasions, such as weddings.
n3s (3 seconds): Use to prevent camera shake.
r5s (5 seconds, self-portrait timer): Use for self-
portraits.
If the setting is not applied by pressing the k button, the selection will be
canceled.
3
Frame the picture and press the shutter-release button halfway.
When using n10s (10 seconds) or n3s (3 seconds), make sure that the subjects
are in focus.
When using r5s (5 seconds, self-portrait timer), press the shutter-release button all
the way down in step 4, and then frame the picture.
4
Press the shutter-release
button all the way down.
Countdown starts. The self-timer
lamp flashes and then glows steadily
about one second before the shutter
is released.
When the shutter is released, the
self-timer is set to k.
To stop the countdown, press the
shutter-release button again.
Shooting Features
Self-timer
J
n
(
).
61
Self-timer
OK
9
9
Advertisement
Table of Contents
