Gigabyte GA-K8NS-939 User Manual page 74

SPDIF Output Device (Optional Device)
A "SPDIF output" connector is available on the
motherboard. Cable with rear bracket could link to the
"SPDIF output" connector (As picture.) For the
further linkage to decoder, rear bracket provides
coaxial cable and Fiber connecting port
1. Connect the SPDIF output device to the rear
bracket of PC, and fix it with screw.
2. Connect SPDIF device to the motherboard.
3. Connect SPDIF to the SPDIF decoder.
(Note) If you want to use both of the 8 channel audio function and SPDIF out function, you may buy the
Audio Combo Kit (refer to the 8 channel Audio Setup section).
GA-K8NS-939/GA-K8NS Pro-939 Motherboard
.
(Note)
- 74 -