Gigabyte GA-K8NS-939 User Manual page 66

Completing the RAID BIOS Setup
After assigning your RAID array disks, press F7. The Clear disk data prompt appears.
RAID Mode: Mirroring
Free Disks
Loc Disk Model Name
[F6] Back [F7] Finish
Press Y if you want to wipe out all the data from the RAID array, otherwise press N. You must choose Yes if
the drives were previously used as RAID drives. The Array List window appears, where you can review the
RAID arrays that you have set up.
You can select a disk array as boot device if you want to boot operating system from an array. Use the arrow
keys to select the array, then press B to specify the array as bootable.
Boot
BBS
[Ctrl-X] Exit
GA-K8NS-939/GA-K8NS Pro-939 Motherboard
NVIDIA RAID Utility May 10 2004
- Define a New Array -
Striping Block:
Clear disk data ? Array Disks
Loc
1.0.M
[Y] YES [N] NO
[ ] Add 1.1.M
[ ] Del
[TAB] Navigate [
NVIDIA RAID Utility May 10 2004
- Array List -
Id Status Vendor Array Model Name
2 Healthy NVIDIA MIRROR 111.79G
[ ] Select [B] Set Boot [N] New Array
- 66 -
Optimal
Disk Model Name
ST3120026AS
ST3120026AS
] Select [ENTER] Popup
[ENTER] Detail