42
PROGRAMMING MODE - SETUP MODE
10-2. Tub clean Load detection setup
Tub clean load detection setup can be used to enable/disable the ability to detect laundry load in the
tub during tub clean.
Enter setup mode.
You will see LqC1
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display
.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears
in the display.
Press the Start button.
Press 75°C (167°F) or 60°C (140°F) button and then
select
or
Disable
Enable
Press the Start button.
The machine sets up load detection function, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button three times.
Button
.
Display
One or the other
will display.