Gigabyte GA-G31-S3G User Manual page 37

FSB OverVoltage Control
Allows you to set the Front Side Bus voltage.
Normal
+0.1V ~ +0.3V
(G)MCH OverVoltage Control
Allows you to set the North Bridge voltage.
Normal
+0.1V ~ +0.3V
CPU Voltage Control
Allows you to set the CPU voltage. Normal sets the CPU voltage as required. The adjustable
range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the
CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
Supplies the FSB voltage as required. (Default)
Increases FSB voltage by 0.1V to 0.3V at 0.1V increment.
Supplies the North Bridge voltage as required. (Default)
Increases North Bridge voltage by 0.1V to 0.3V at 0.1V increment.
- 37 - BIOS Setup