Gigabyte GA-EP43-DS3 User Manual page 89

Step 5:
Enter the array capacity and press <Enter>. Finally press <Enter> on the Create Volume item to begin
creating the RAID array. When prompted to confirm whether to create this volume, press <Y> to confirm
or <N> to cancel (Figure 6).
[ ]-Change
When completed, you can see detailed information about the RAID array in the DISK/VOLUME
INFORMATION section, including the RAID level, stripe block size, array name, and array capacity,
etc. (Figure 7)
RAID Volumes :
ID Name
0 Volume0
Physical Disks :
Port Drive Model
0 ST3120026AS
1 ST3120026AS
[
To exit the ICH10R RAID BIOS utility, press <Esc> or select Exit in MAIN MENU.
Now, you may proceed to create the SATA RAID/AHCI driver diskette and the installation of the SATA
RAID/ACHI driver and operating system.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1013 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N) :
Press ENTER to create the specified volume.
[TAB]-Next
Intel(R) Matrix Storage Manager option ROM v8.5.0.1013 ICH10R wRAID5
Copyright(C) 2003-08 Intel Corporation. All Rights Reversed.
1. Create RAID Volume
2. Delete RAID Volume
[ DISK/VOLUME INFORMATION ]
Level
RAID0(Stripe)
Serial #
3JT354CP
3JT329JX
]-Select
RAID_Volume0
RAID0(Stripe)
Select Disks
128KB
223.6 GB
Create Volume
[ HELP ]
[ESC]-Previous Menu
Figure 6
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
Strip
128KB
[ESC]-Exit
Figure 7
- 89 -
[ENTER]-Select
Size Status Bootable
223.6GB Normal Yes
Size Type/Status(Vol ID)
111.8GB Member Disk(0)
111.8GB Member Disk(0)
[ENTER]-Select Menu
Appendix