Security Chip Configuration; (Note) - Gigabyte GA-EP43-DS3 User Manual

2-15 Security Chip Configuration

Security Chip
x Clear Security Chip
Security Chip State
: Move Enter: Select
F5: Previous Values
Security Chip
Enables or disables the security chip. It is recommended that you use this function with the
Supervisor/User password.
Enabled
Enabled/Activate
Disabled
Clear Security Chip
This item allows you to clear all settings in the security chip.
Press <Enter> to enter the setup screen:
User Information in Security Chip is cleared!
Are you sure you want to clear it?
[YES]
Setup Confirmation
Need reboot to clear Security Chip.
Save configuration changes and reboot now?
[YES]
Security Chip State
Displays the current settings in the security chip.
Only for GA-EP43-DS3R.

(Note)

This feature is optional due to different regional policy.
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Security Chip Configuration
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Enables the security chip.
Enables the security chip and initializes the Security Platform.
Disables the security chip. (Default)
Setup Warning
[NO]
[NO]
(Note)
[Disabled]
Enter
Disabled/Deactivated
F10: Save
To clear the settings in the security chip, press
<Enter> on [YES].
Confirm again.
If you are sure to clear the settings, press <Enter>
on [YES] again, then the system will reboot and
clear the settings.
- 63 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup