Usb Controller; Usb Legacy Support; Onboard Lan; Init Display First - Gigabyte GA-8SIML User Manual

C Share Memory Size
84MB/8MB/16MB/32MB/64MB Set onchip VGA shared memory size.(Default Value:32MB)
C USB Controller
Disable this option if you are not using the onboard USB feature.
Enable USB Controller. (Default v alue)
8Enabled
Disable USB Controller.
8Disabled
C USB Legacy Support
Enable USB Legacy Support.
8Enabled
Disable this function.(Default Value)
8Disabled
C Onboard Lan
Disable this function.
8Disabled
Enable Onboard Lan Chip function. (Default Value)
8Enabled
C Init Display First
This feature allows you to select the first initation of the monitor display from which card, when you
install an AGP VGA card and a PCI VGA card on board.
Set Init Display First to PCI Slot.
8PCI
Set Init Display First to AGP. (Default v alue)
8AGP
C OnBoard FDC
When enabled, the fioppy diskette drive (FDD) controller is activated.
Disable this function.
8Disabled
Enable on board floppy disk controller.(Default v alue)
8Enabled
C Onboard Serial Port A
BIOS w ill automatically setup the port A address.
8Auto
Enable onboard Serial port A and using daddress 3F8 , IRQ4. (Default Value)
83F8/IRQ4
Enable onboard Serial port A and using daddress 2F8 , IRQ3.
82F8/IRQ3
Enable onboard Serial port A and using daddress 3E8 , IRQ4.
83E8/IRQ4
Enable onboard Serial port A and using daddress 2E8 , IRQ3.
82E8/IRQ3
Disable onboard Serial port A.
8Disabled
- 35 - BIOS Setup