Gigabyte GA-8SD533 User Manual page 23

10) F_AUDIO (Front Audio Connector)
10 9
Rear Audio (L)
Rear Audio (R)
POWER
GND
2 1
11) CD_IN (CD Audio Line In)
CD-L
1
GND
CD-R
12) AUX_IN (AUX In Connector)
AUX-L 1
GND
AUX-R
13) F_USB1/F_USB2 (Front USB Connector)
USB Dy+
USB Dy-
GND
Power
1
Power
USB Dx-
GND
USB Dx+
14) CI (CASE OPEN)
1
Signal
GND
Ø If you want to use "Front Audio" connector, you
must remove 5-6, 9-10 Jumper. In order to
utilize the front audio header, your chassis must
Front Audio (L)
have front audio connector. Also please make
Reserved
sure the pin assigment on the cable is the same
Front Audio (R)
REF
as the pin assigment on the MB header. To find
MIC
out if the chassis you are buying support front
audio connector, please contact your dealer.
Ø Connect CD-ROM or DVD-ROM audio out
to the connector.
Ø Connect other device(such as PCI TV Tunner
audio out )to the connector.
Ø Be careful with the polarity of the front panel
USB connector. Check t h e pin assignment while
USB Over Current you connect the front panel USB cable. Please
cont a ct your nearest dealer f o r opti o nal f r ont panel
USB cable.
Ø This 2 pin connector allows your system to
enable or di s able t h e "Case Open" item in BIOS
if the system case begin remove.
- 19 - Hardw are Installation Process