Setting Up Your Phone - Sprint SANYO PRO-200 User Manual

Setting Up Your Phone

1.
Install the battery (if necessary).
Slide the battery cover latch into its unlock position
and slide the battery cover downward to remove it.
Insert the battery into the opening, making sure the
connectors align. Gently press down to secure the
battery.
Replace the battery cover and press up until you hear
a click. Lock the battery cover by sliding the latch into
its locked position.
2.
Press
Your phone will turn on, search for Sprint service,
and enter standby mode.
If your phone is not yet activated, or if it is locked, see
"Getting Started With Sprint Service"on the
following page for more information.
3.
Make your first call.
Use your keypad to enter a phone number.
Press
Note Your phone's battery should have enough charge to turn on
your phone, find a signal, set up your voicemail, and make a
call. You should fully charge your battery as soon as possible.
See "Charging the Battery"on page 25 for details.
to turn the phone on.
.
Section 1A: Setting Up Service 3