Using Voice-Activated Dialing - Sprint SANYO PRO-200 User Manual

Using Voice-Activated Dialing

In addition to Sprint Voice Command (see page 199), you can
use a voice dial tag to automatically dial a phone number in
your Contacts. (A voice dial tag is a command you record and
use to place calls without using the keypad.) Your phone can
store up to 30 voice dial tags.
Note Please set the Voice Guide feature (see page 63) to On before
using the Voice-Activated Dialing so that you can hear voice
instructions through the phone. The default setting is Off .
Making a Call Using Voice-Activated Dialing
1.
Press and hold
2.
Follow the voice prompts and recite the entry's voice dial
tag into the microphone.
Tip
You can also make a call using voice-activated dialing with the
phone closed. Press and hold the side call key while in standby
mode, and follow the voice prompts.
Programming Voice Dial Tags
1.
Select a Contacts entry to which you would like to add a
voice dial tag and press
Entries"on page 115.)
2.
Select the number you want to assign to the voice dial
tag, and then press Options (right softkey) >
SetVoice Tag > Add.
3.
After you are prompted to say a name to program, wait
for the beep and then say the name into the microphone.
4.
Repeat the name after the beep, as prompted.
(The display shows "Voice Tag Recorded.")
Tip Record voice dial tags in a quiet environment.
142 Section 2I: Using Your Phone's Voice Services
.
. (See "Finding Contacts