Get Started 1. Remove round battery cover to access clock movement and battery compartment(s). 2. Insert 1 AA battery into the movement at the center of the clock. 3. OPTIONAL: For extended battery life, install two additional batteries, one on either side of the movement. 4.
Page 3
Manual Set Time On rare occasions, in certain areas, the clock may not be able to receive the radio controlled time signal due to the strength of the signal or the geographic location. In this case, the clock can be set manually and used as a regular quartz wall clock.
Temperature and Humidity ® The La Crosse Technology Atomic Wall Clock has two analog sensors that measure surrounding temperature and humidity. The temperature information is displayed in degrees Fahrenheit and Celsius, and humidity data is displayed in percentage. Outer ring...
Daylight Saving Time The National Institute of Standards and Technology and WWVB encode a special DST “bit” in the WWVB transmission for DST. Your clock will read this information and automatically advance the hands one hour in the spring and eleven hours in the fall. Arizona: If you live in an area that does not recognize DST, you must press the DST button one time only to turn the DST indicator to OFF.
1 battery; over 12 months 3 batteries; over 36 months Warranty and Support Information La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support with questions or visit our online help.