Residual Risks; Know Your Product; Startup Protection; Maintenance - Ryobi RAG950-125 Original Instructions Manual

surfaces while it is running. Grinding wheels
continue to rotate after the product is switched off.
Never touch the wheel or place it on the floor or
other surfaces while it is rotating.
q) Use the product only for approved applications.
Never use coolants or water or use the tool as a
r) Grip the product securely with both hands while
operating.

RESIDUAL RISKS

Even when the angle grinder is used as prescribed, it is
factors. The following hazards may arise and the operator
should pay special attention to avoid the following:
– Metal or abrasive particles may enter the eyes and
cause severe permanent damage. Wear goggles
approved for grinding operations when operating
the product.
–
–
suitable for protecting against particles from the
–
use. Wear gloves when changing discs or touching
possible.
–
of hearing damage, and the effects are cumulative.
time, wear hearing protection.

RISK REDUCTION

It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
are all thought to contribute to the development of these
operator to possibly reduce the effects of vibration:
Keep your body warm in cold weather. When operating
contributing to Raynaud's Syndrome.
blood circulation.
immediately discontinue use and see your doctor about
these symptoms.
4
WARNING
of a tool. When using any tool for prolonged periods,

KNOW YOUR PRODUCT

See page 7.
1. Switch button
2.
3.
4. Wheel guard assembly
5. Clamp nut
6. Grinding wheel
7. Disc flange
8.
9. Wrench
10.

STARTUP PROTECTION

This prevents the machine from restarting by itself after a

MAINTENANCE

WARNING
motion.
The product should never be connected to a power
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product will prevent
condition.
Authorized Service Center for a thorough cleaning and
lubrication at least once a year.
If the power supply cord is damaged, it must be
replaced only by the manufacturer or by an authorized
center.
WARNING
To ensure safety and reliability, all repairs should be
performed by an authorised service center or other
qualified service organisation.
WARNING
Do not use compressed air to blow dust from the grinder.
This practice is dangerous and can cause dirt and grit to