Item Checklist; Warning - Gigabyte GA-8IEX Series User Manual

P4 titan 533 motherboard
Hide thumbs Also See for GA-8IEX Series:
Table of Contents

Advertisement

Item Checklist

þ The GA-8IEX Series motherboard
þ IDE (ATA100) cable x 1/ Floppy cable x 1
þ IDE (ATA133) cable x 2(**)
þ CD for motherboard driver & utility (IUCD)
þ IEEE 1394 Cable x1 (**)
þ Quick PC Installation Guide
þ Motherboard Settings Label

WARNING!

Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some precautions whenever
you work on your computer.
1.
Unplug your computer when working on the inside.
2.
Use a grounded wrist strap before handling computer components. If you do not have
one, touch both of your hands to a safely grounded object or to a metal object, such as
the power supply case.
3.
Hold components by the edges and try not touch the IC chips, leads or connectors, or
other components.
4.
Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
5.
Ensure that the ATX power supply is switched off before you plug in or remove the ATX
ower connector on the motherboard.
Installing the motherboard to the chassis...
If the motherboard has mounting holes, but they don' t line up with the holes on the base and
there are no slots to attach the spacers, do not become alarmed you can still attach the spacers to
the mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to
cut off, so be careful of your hands). In this way you can still attach the motherboard to the base
without worrying about short circuits. Sometimes you may need to use the plastic springs to isolate
the screw from the motherboard PCB surface, because the circuit wire may be near by the hole. Be
careful, don' t let the screw contact any printed circuit write or parts on the PCB that are near the
fixing hole, otherwise it may damage the board or cause board malfunctioning.
* For GA-8IEX Only. ** For GA-8IEXP Only.
o 2 Port USB Cable x 1
þ 4 Port USB Cable x 1
þ SPDIF KIT x 1(SPD-KIT)
þ GA-8IEX Series user' s manual
þ I/O Shield
þ RAID Manual (**)
- 3 -
Introduction

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ga-8iexp

Table of Contents