Step 3: Install Expansion Cards - Gigabyte GA-8IE User Manual

Step 3: Install expansion cards

1. Read the related expansion card' s instruction document before install the ex pansion card into
the computer.
2. Remove y our computer' s chassis cover, necessary screws and slot bracket from the computer.
3. Press the expansion card firmly into expansion slot in motherboard.
4. Be sure the metal contacts on the card are indeed seated in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer' s chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.
AGP Card
Please carefully pull out the small white-
draw able bar at the end of the AGP slot
when you try to install/ Uninstall the AGP
card. Please align the AGP card to the
onboard AGP slot and press firmly dow n on
the slot .M ake sure your AGP card is locked
by the small white- drawable bar.
- 11 - Hardware Installation Process