Samsung HPT5044 Series Service Manual page 17

Disassembly & Reassembly
3-1-3 Separation of FILTER-EMI AC LINE
Part Name
FILTER-
① Detach connector from SMPS.
EMI
AC LINE
② Remove 2 screws. (
: PH,+,WWP,M3,L8,NI PLT
③ Remove a screw. (
: BH,+,S,M4,L10,ZPC(BLK)
④ Remove FILTER-EMI AC LINE.
3-1-4 Separation of BRACKET-PCB
Part Name
Bracket
① Remove a screw.
PCB
: BH,+,S,M4,L10,ZPC(BLK)
② Remove the BRACKET-PCB.
3-1-5 Separation of ASSY BRACKET P-WALL
Part Name
Wall
① Remove 8 screws. (
Bracket
: BH,+,S,M4,L10,ZPC(BLK)
② Remove 8 screws. (
: BH,+,B,M4,L12,ZPC(BLK)
③ Remove Wall Bracket.
: Please lay the PDP panel face down
on a soft surface when separating front
cover.
3-2
Description
)
)
Description
Description
)
)
Description Photo
Description Photo
Description Photo
Samsung Electronics