Table of Contents
Advertisement
OPTION menu
Item
変
変
変
SERVICE
(continued)
変
46
KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When ON
is selected, the buttons on the projector except the STANDBY/ON
button are locked.
ON
OFF
• Please use this function to prevent tampering or accidental
operation. This function does not have any effect on the remote
control.
REMOTE FREQ.
(1) Use the ▲/▼ button to change the projector's remote sensor
frequency setting (
1:NORMAL
(2) Use the ◄/► button to change the
projector's remote sensor on or off.
ON
OFF
The factory default setting is for both 1:NORMAL and 2:HIGH to
be on. If the remote control does not function correctly, set the this
to either only 1 or only 2 as described in Remote Control Settings
13 ).
(
Neither can be turned off at the same time.
INFORMATION
Selecting this item displays a dialog titled "INPUT_INFORMATION".
It shows the information about the current input.
• The "FRAME LOCK" message on the dialog means the frame lock
function is working.
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is
displayed together with the input information in the INPUT_
INFORMATION box (
FACTORY RESET
Selecting OK using the ► button performs this function. By this
function, all the items in all of menus will collectively return to the
initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE, FILTER MESSAGE and SECURITY settings are not
reset.
CANCEL
OK
Description
4 ).
2:HIGH
51 ).
Advertisement
Table of Contents
