EC Declaration of Conformity can only be operated on single-phase AC supply. They Makita declares that the following Machine(s): are double-insulated and can, therefore, also be used Designation of Machine: from sockets without earth wire.
Page 3
Yasushi Fukaya current of 30 mA or less is always recommended. Director Personal safety Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium Stay alert, watch what you are doing and use common sense when operating a power tool. Do GEA005-3 not use a power tool while you are tired or under General Power Tool Safety the influence of drugs, alcohol or medication.
starting the power tool accidentally. FUNCTIONAL DESCRIPTION 21. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to CAUTION: operate the power tool. Power tools are Always be sure that the tool is switched off and •...
Install the nozzle with the attached sash nozzle. To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. 013222...