Beko DF8421TX0 User Manual page 22

1.Remove the water tank in the drawer or
container carefully.
2.Empty the water in the tank.
• If there is an accumulation of pilling in
the tank, wash it out with water
current.
• Reinstall the water tank in its place.
VS
REMARK
• If the direct water drain line is used as an
option, it is not necessary to empty the
water tank.
6.4 Cleaning the condenser
A small amount of lint may pass through the
filter and collect on the metal surface of the
condenser.
The metal surface of the condenser should be
cleaned regularly.
If the filter icon flashes on the screen, please
inspect the metal surface of the condenser. If
it's dirty, clean it. This piece must be checked
at least once every 6 months
22
• Open the plinth by
pressing
the button
baseboard.
VS
REMARK
• The brush is inside the bag of printing
materials. You can place it in its
housing on the
air channel cover after first use.
Dryer / User Manual
• Move
the latches
opening
as shown here
against for
• Pull the brush to
the left
and remove it.
You can
use the brush
of cleaning
to eliminate
the stuffed animals
collected on the
metallic surface
of the condenser.