Installing Epson Status Monitor 3; Using Bi-D Adjustment; Making Adjustment With Bi-D Adjustment - Epson C11CF39402A0 User Manual

Installing EPSON Status Monitor 3

Follow the steps below to install EPSON Status Monitor 3.
1. Make sure that the printer is off and that Windows is running on your computer.
2. Insert the Software Disc in the CD-ROM drive.
Note:
Before proceeding, make sure you have installed the printer driver on your computer.
3. Follow the on-screen instructions to install the software.
You can also run the executable file that locates in the following.
Client's OS
Windows XP/Vista/7/8/8.1/10 (x64)
Windows XP/Vista/7/8/8.1/10 (x86)

Using Bi-D Adjustment

This utility tool allows you to make adjustment when you find a misalignment in vertical line.

Making adjustment with Bi-D Adjustment

To make Bi-D Adjustment, follow the steps below.
Caution:
!
❏ Do not turn off the printer while the printer is printing adjustment pattern. Doing so may
cause the printer to store incorrect settings. If you turned off the printer during the adjustment
process, restart Bi-D Adjustment again.
❏ Network connection is not supported.
❏ Make sure that the printer's status is ready before making Bi-D Adjustment.
❏ If Bi-D Adjustment is not printed properly, set the printer's font setting to default and try
again.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN
Folder Name
\Apps\StatusMonitor\STM3x64
\Apps\StatusMonitor\STM3
User's Guide
Printer Software 72