Using An External Subwoofer; Making Sound Easy To Listen At Low Volume - Yamaha SRT-1000 Owner's Manual

Using an external subwoofer

The unit has dual built-in subwoofers; however you can connect an external subwoofer
when you want to enhance low frequency sound. Connect a subwoofer to the
SUBWOOFER OUT jack of the unit.
Unit (rear)
Overhead view
NOTE
• Use an external subwoofer with built-in amplifier.
16
Pin cable for subwoofer
(commercially available)

Making sound easy to listen at low volume

You can change the dynamic range to make sounds easy to hear at a low volume.
1
Turn off the unit.
2
Hold down the key for the desired mode for more than 5 seconds.
The unit turns on with the selected setting.
Three settings are available (see below).
You can confirm the setting status by the lights of the indicator, when the unit is turned
on.
Setting
Normal
Standard
Mono input
Maximum
NOTE
• Normal is set as default.
Returns to Normal
Sets to Standard
Sets to Maximum
Description
Automatically adjusts the dynamic range
based on the volume level of the source.
Compresses the dynamic range to suit a
living room environment, etc.
Does not compress the dynamic range.
Indicator
Lights up in green
Lights up in orange
Lights up in red